How to Install a Ghost Immobiliser
Ghost immobilisers protect your vehicle from key cloning or hacking. It prevents the engine from running until a PIN code is entered. This can be as long as 20 characters.
It is undetectable by thieves who don't expect this extra layer of security. Certain systems also come with an application that allows owners to disarm the immobiliser in case they forget their PIN code or to use the service/valet mode.
Connecting to the vehicle's CAN bus
The Ghost 2 Immobiliser is an advanced security system that can be integrated into your vehicle's ECU, providing a discreet protection against thieves. It is highly efficient and user-friendly and can be a valuable option to add to your vehicle's security arsenal. However, like any anti-theft device, it is not 100% reliable and requires regular maintenance to ensure proper operation. Fortunately, this guide can help you get the most value from the Ghost 2 Immobiliser.
CAN (Controller Area Network) is a robust serial network that allows microcontrollers to communicate with one another over short distances without the necessity of a central control unit. It is designed to multiplex electrical wiring in vehicles to cut down on copper and comes with a variety of advantages, such as low cost and a simple use.
The CAN protocol is used in most modern vehicles to communicate with the engine management system, transmission controller, steering control module air conditioning controls and more. It also transmits data from sensors like speed sensors and inputs, to control the various functions of the car. The CAN bus is able to monitor the condition of these various components and could stop the vehicle from starting when it is in a dangerous condition.
It's important to know how the CAN bus works and how it's secured. The CAN bus is an excellent method to add new features to your vehicle, but it's vital to secure it from hackers and other threats. Installing a firewall, and monitoring your CAN-bus using software is the best method to accomplish this.
Ghost2's secluded control unit is concealed inside the car's wiring harness or dashboard, removing the possibility of a thief physically altering it. It is impossible to reset a pin code or an emergency code without having access to the car.
You can activate Transport Mode if you need to sell your car for service, valet parking or any other reason. This feature will disable the Ghost immobiliser's keyfob and ignition functions, and will only reactivate when the car reaches 31 mph for a period of 15 minutes.
The process of creating a PIN code
The Ghost immobiliser is a robust security system that guards your vehicle from thieves. The latest technology utilizes a PIN code to disable the engine and block it from running without the proper code or an authorized fob or mobile device. The system's discrete design is unnoticeable and offers unrivaled protection against theft. Moreover the system is TASSA tested and could provide significant savings on insurance premiums for cars.
During installation during installation, the Ghost system enters an learning mode that records the sequence of buttons pressed to create your unique pin code. The installer will guide you through activating the system once the pin code has been created. Once activated the Ghost system shuts down your vehicle's starting motor unless you enter a valid pin or switch the vehicle to transport mode. This makes it difficult for thieves or cloners who want to hack or clone your vehicle's starter system.
It is simple to install it is easy to install a Ghost immobiliser, but you must follow the detailed instructions included in the user's manual to ensure the proper operation. Hand tools and multimeters can be used to check electrical values. Insulation tape and heat shrink tubing may protect the exposed wiring, while cable ties are essential for keeping everything neat and secure. Also, make certain to test the system regularly to identify any potential issues and mistakes.
It is essential to check the system one final time prior to turning on the ignition. The Ghost immobiliser will re-arm itself after a period of 3 to 30 seconds, based on your car's model. The system also comes with a Service/Valet mode that allows you to temporarily remove the system for servicing or valet parking.
Idealy, the immobiliser will be hidden beneath the dashboard or behind the steering wheel. Make use of a small piece of duct tape or paint on the wires CAN H and L to make them easier to locate during testing. In addition, the CAN H and CAN L wires should be connected to a power source that provides constant 12V. It is essential to test the connections again after testing as incorrect identification of these wires may cause the system malfunction.
Invoking the system
A ghost immobiliser stops your car from starting when you press certain buttons in the vehicle, typically on the steering wheel or the door panel, or the central console. Highly recommended Website is decided by the user and is able to be changed at any time. Once activated, the system will not be deactivated. This makes it an ideal choice for anyone looking to protect their vehicle against theft.
The device is not designed to be detected by modern diagnostics and code-grabbing technology. It does not emit radio frequencies making it even harder for thieves to identify.
If the device is discovered it will stop the engine from running. It will also sound an alarm to scare the thief away. The device can be used to monitor the location of a vehicle and help police recover the vehicle in case it is taken.
Contact Car Specalist Customs for a quote or to discuss your options in a Ghost immobiliser. We are fully qualified to install a ghost immobiliser to your vehicle, and will make sure that it is tucked away in a hard-to-reach area. We can also install additional security measures, including a kill switch or wheel lock, to ensure your vehicle is secure from thieves.
Disarming the system
It's important to understand how to disable a Ghost immobiliser, if it's fitted to your car. You can use this in the event that you lose your keys or your car battery dies. The system uses an unique PIN code that only you are aware of. It will not start the vehicle without this code. Pressing the combination buttons on the steering wheel or dashboard is the easiest method to enter your code. This is much easier than using a key fob, and stops others from copying your remote.
Unlike some aftermarket immobilisers that require cutting wires to install, Ghost2 is non-invasive and integrates with your vehicle's CAN bus network to function. Its main feature is its ability to bypass the engine without affecting your vehicle's normal functions, making it difficult for thieves to use signal boosters to clone your car key. Moreover, it does not emit radio frequencies, which means thieves aren't able to detect the system.
The Ghost system comes with the option of a Transport Mode that lets you temporarily disable security in situations such as service or transportation. This feature is a great option when you need to lend your vehicle to a person who isn't sharing the PIN code or when you wish to secure your vehicle while driving it. To activate the Transport Mode simply press the service button five times within a period of 2 seconds. The Ghost system will confirm activation via 5 signal signals.
Keep the emergency code inside your vehicle in a safe place. If you ever find yourself locked out of your car You can call the technician or the company that installed the system and they'll provide you with the code. If they are not able to contact you then you can try to contact an authorized dealer but this would require verification procedures and could result in additional charges.
Aside from the convenience of this system, you can count on it to guard your vehicle from theft and cut down on insurance costs. Many insurance companies offer lower monthly premiums or even financial incentives for installing this anti-theft system.